A INDOOR POSITION ROUTING (IPR) AND DATA MONITOR USING BLUETOOTH LOW ENERGY TECHNOLOGY (iBEACON-BLE): AN IMPLEMENTATION STUDY
DOI:
https://doi.org/10.46291/ICONTECHvol5iss1pp38-61Ключевые слова:
Bluetooth, BLE, iBeacon, Indoor, Mapping, Broadcasting, TX, RX.Аннотация
Rapid advancements in mobile industry have emerged new technological ideas and applications for researchers by allowing smart devices over the last decade. In recent years, the need for Indoor Position Routing (IPR) and Location-Based Advertisements (LBA) systems are increasingly common, IPR and LBA systems have been becoming very popular. Nowadays, it has become possible to create software and hardware applications for IPR and LBA in indoor environments, thanks to developments of different technologies. The development of the system should be based on low-cost technology, it should be suitable for integration and indoors operation. New options and possibilities for indoor locations are presented by the iBeacon-Bluetooth Low Energy (BLE) radio protocol. iBeacon-BLE supports portable battery-powered system that can be smoothly distributed at low cost giving it distinct advantages over Wi-Fi. Therefore, in this study, a technological infrastructure is created to solve the navigation problem in closed locations using iBeacon-BLE technology, a data monitoring information system is proposed for smart devices of currently available technology for IPR, LBA with using iBeacon-BLE. The localization of the objects based on iBeacon-BLE and their combination are determined using the measured data with the developed application. To build an IPR system for indoor environments, the available hardware, software, and network technologies are presented. The concept of the indoor monitoring system and the technologies can be used to develop the IPR system are presented. This system is made up of iBeacon-BLE sensor nodes, a smart device and a mobile application that provides IPR and LBA services by measuring the distance between Transmitter (TX) and Receiver (RX). The proposed model uses the trilateration method, it allows the mobile application to determine the exact location of the object at the micro-level size. The proposed model uses sensory data to identify and trilateration the object’s position.
Библиографические ссылки
Ali, M., Albasha, L., and Al-Nashash, H., (2011). "A Bluetooth Low Energy Implantable Glucose Monitoring System", In Proceedings of 8th European Radar Conf. (EuRAD’11), pp. 377–380.
Balakrishnan, M. K. (2017). “Indoor Positioning System Survey Using BLE-iBeacon”, Master Thesis in Electrical Engineering-Power systems, pp. 1-46.
Bruno, R., and Delmastro, F. (2003). “Design and analysis of a Bluetooth-based indoor localization system”, in Personal Wireless Communications in Computer Science, pp. 711-725.
Chai, S., Renbo, An, and Du, Z. (2016). “An Indoor Positioning Algorithm Using Bluetooth Low Energy RSSI”, International Conference on Advanced Material Science and Environmental Engineering (AMSEE), pp. 276-278.
Cho H., Ji, J., Chen, Z., Park H., and Lee, W. (2015). “Measuring a distance between things with improved accuracy”, Procedia Computer Science, pp.1083-1088.
Estel, M., and Fischer, L. (2015). “Feasibility of Bluetooth Beacons for Indoor Localization”, Digital Enterprise Computing, pp. 97-108.
Ferreira, A., Fernandes, D., Catarino, A., and Monteiro, J. (2017). “Localization and Positioning Systems for Emergency Responders: A Survey”, IEEE Communications Surveys, pp. 1-37.
H. S. Maghdid, H. S., Lami, I. A., Ghafoor, K. Z., and Lloret, J. (2016). “Seamless outdoors-indoors localization solutions on smartphones: implementation and challenges”, ACM Computing Surveys (CSUR), pp. 1-37.
Nuaimi, K. A., and Kamel, H. (2011). “A survey of indoor positioning systems and algorithms”, Proc. IEEE IIT, pp. 185-190.
Kaluza, M., Beg, K., and Vukelic, B. (2017). “Analysis of an Indoor Positioning Systems”, Zbornik Veleučilišta u Rijeci, pp. 13-32.
Kim, S. Y, Lee, M. H, and Choi, J, Y. (2010). “Indoor positioning system using incident angle detection of infrared sensor”, Journal of Institute of Control, Robotics, and Systems, pp. 991-996.
Kjaergaard, M. B. (2010). “Indoor positioning using GPS revisited”, Pervasive Computing, Springer Berlin Heidelberg, pp. 38-56.
Koyuncu, H., and Yang, S. H. (2010). “A survey of indoor positioning and object locating systems”, Int. J. Computer Science Network Security, pp. 121-128.
Kotaru, M., Joshi, K., Bharadia, D., and Katti, S. (2015). “Decimeter level localization using Wi-Fi,” in ACM SIGCOMM Computer Communication Review, vol. 45, pp. 269–282.
Krishnan, P., Krishnakumar, Ju, W. H., Mallows, C., and Gamt, S. (2004). “A system for LEASE: Location estimation assisted by stationary emitters for indoor RF wireless networks”, INFOCOM, Conference of the IEEE Computer and Communications Societies, pp. 1001-1011.
Kriz, P., Maly, F., and Kozel, T. (2016). “Improving indoor localization using Bluetooth low energy Beacons”, Mobile Information Systems, pp. 1-11.
Ladd, A. M., Bekris, K. E., Rudys, A., Kavraki, L. E. and Wallach, D. S. (2005) “Robotics-based location sensing using wireless ethernet,” Wireless Networks, pp. 189-204.
Liu, H., Darabi, H., Banerjee, P., and Liu, J. (2007). “Survey of wireless indoor positioning techniques and systems”, IEEE Trans. Syst., Man, Cybern. C, Appl., pp. 1067-1080.
Mautz, R. (2009). “Overview of current indoor positioning systems”, Geodezija ir kartografija, vol. 35, no. 1, pp. 18-22.
Munoz-Organero, M., Munoz-Merino, P. J., and Kloos, C. D. (2012). “Using Bluetooth to implement a pervasive indoor positioning system with minimal requirements at the application level”, Mobile Information Systems, pp. 73-82.
Saab, S. S., and Nakad, Z. S. (2011). “A Standalone RFID Indoor Positioning System Using Passive Tags”, Ieee Transactions on Industrial Electronics, pp. 1961-1970.
Salas, A. C. (2014). “Indoor Positioning System based on Bluetooth Low Energy”, Master Thesis in science and Telecommunication Engineering, pp. 1-68.
Taskin, D. (2017). “Design of Bluetooth Low Energy Based Indoor Positioning System”, Balkan Journal of Electrical and Computer Engineering, pp. 60-65.
Tesoriero, R. (2008). “Using active and passive RFID technology to support indoor location-aware systems”, Consumer Electronics, IEEE Transactions on vol. 54, no. 2, pp. 578-583.
Vasisht, D., Kumar, S., and Katabi, D. (2016). “Decimeter-level localization with a single Wi-Fi access point”, USENIX Symposium on Networked Systems Design (NSDI 16), pp. 165–178.
Xiang, Z., Song, S., Chen, J., Wang, H., Huang, J., and Gao, X. (2004). “A wireless LAN-based indoor positioning technology”, IBM Journal of Research and Development, pp. 617-626.
Yamaguchi, S., Arai, D., Ogishi, T., and Ano, S. (2015). “Experimental study of long-term operation of BLE tags for realizing indoor location-based service”, International Conference on Intelligence in Next Generation Networks, pp. 136–138.
Yang, J., Wang, Z., and Zhang, X. (2015). “An iBeacon-based Indoor Positioning Systems for Hospitals”, International Journal of Smart Home, pp. 161-168.
Yin, S., Liu, J., and Teng, L. (2015). “A Novel Initial Value Selection for Discrete Kalman Filter used in Indoor Localization Processing”, Journal of Computational Inf. Systems, pp.7063-7070.
Yu, B., Xu, L., and Li, Y. (2012). "Bluetooth Low Energy (BLE) Based Mobile Electrocardiogram Monitoring System", In Proceedings of International Conference on Information and Automation (ICIA’12), pp. 763-767.
Zhou, S., and Pollard, J. K. (2016). “Position measurement using Bluetooth”, IEEE Transactions on Consumer Electronics, pp.555-558.
Zou, H., Jiang, H., Luo, Y., Zhu, J., Lu, X., and Xie, L. (2016). “Blue Detect: An iBeacon-Enabled Scheme for Accurate and Energy-Efficient Indoor-Outdoor Detection and Seamless Location-Based Service”, Sensors, pp. 1-18.
Загрузки
Опубликован
Как цитировать
Выпуск
Раздел
Лицензия
Copyright (c) 2021 ICONTECH INTERNATIONAL JOURNAL
Это произведение доступно по лицензии Creative Commons «Attribution-NonCommercial-NoDerivatives» («Атрибуция — Некоммерческое использование — Без производных произведений») 4.0 Всемирная.