3D PRINTER DESIGN, MANUFACTURING AND EFFECT OF INFILL PATTERNS ON MECHANICAL PROPERTlES

Authors

  • Hande Güler Özgül Bursa Uludağ Üniversitesi
  • Onur Tatlı Msc

DOI:

https://doi.org/10.46291/ICONTECHvol4iss1pp13-24

Keywords:

3D printer, Additive manufacturing, PLA, Mechanical properties.

Abstract

Along with the technological developments, it is an expected situation to discover new developed production methods. Additive manufacturing technologies, such as three-dimensional (3D) printers are one of these methods, allowing direct production of parts with complex geometries that cannot be produced by conventional methods. The most popular and inexpensive method among additive manufacturing technologies is FDM (Fused Deposition Modeling) method. This method is particularly interesting for the manufacture of parts with low production volumes.

In this study, a 3D-FDM printer with a print volume of 200x200x210 mm has been designed and manufactured.PLA (polylactic acid) test samples having 2 different infill geometries were produced with the 3D printer. Tensile, three-point bending and charpyimpact tests were applied to these samples to investigate the effect of inner filling geometry on mechanical properties. The inner filling geometries are in the form of grid and gyroid. According to the results, while the geometry with the tensile force is "grid", while the geometry with the maximum bending force is "gyroid".It was concluded that different inner filling geometries do not have a significant impact on Charpy impact strength.

References

Aydın, H. Y., Kılıç, A., Tekin, A. R. 2019. Geleneksel Türk Gıdalarının 3b Yazıcı İle Yazdırılması, Internatıonal Journal Of 3d Prıntıng Technologıes And Dıgıtal Industry, 3(1): 1-10.

Aydın, L., Küçük, S., 2014. Üç Boyutlu Yazıcıyla Ayak Bileği Ortezinin Tasarımı ve Geliştirilmesi. Tıp Tekno’14. 25-27 Eylül, KAPADOKYA

Chacón, J. M., Caminero, M. A., García-Plaza, E., Núñez, P. J.2017. Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection, Materials and Design, 124: 143–157.

Çelebi, A., Tosun H., Önçağ A. Ç. 2017. Hasarlı Bir Kafatasının Üç Boyutlu Yazıcı İle İmalatı ve İmplant Tasarımı, Internatıonal Journal Of 3d Prıntıng Technologıes And Dıgıtal Industry, 1(1): 27-35.

Durgun, I., Ertan, R.2014. Experimental investigation of FDM process for improvement of mechanical properties and production cost, Rapid Prototyping Journal, 20(3): 228–235.

Fernandez-Vicente, M., Calle, W., Ferrandiz, S., Conejero, A.2016. Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing, 3D Printing and Additive Manufacturing, 3(3): 183–192.

NEMA 17 stepper motor. https://reprap.org/wiki/NEMA_17_Stepper_motor. Erişim: Mayıs, 2020.

PCB heatbed. https://reprap.org/wiki/PCB_Heatbed. Erişim: Mayıs, 2020.

Sezer, H. K., Eren, O., Börklü, H. R., Özdemir, V.2019. Additive manufacturing of carbon fiber reinforced plastic composites by fused deposition modelling: Effect of fiber content and process parameters on mechanical properties, Journal of the Faculty of Engineering and Architecture of Gazi University, 34(2): 663–674.

Stoklasek, P., Navratil, M., Bednarik, M., Hudec, I., Petrzelka, D. 2018. Flexural behaviour of ABS 3D printed parts on professional printer Stratasys Fortus 900mc. MATEC Web of Conferences, 210: 1–5

Vidakis, N., Petousis, M., Vairis, A., Savvakis, K., Maniadi, A. 2019. A parametric determination of bending and Charpy’s impact strength of ABS and ABS-plus fused deposition modeling specimens, Progress in Additive Manufacturing, 4(3): 323–330.

Yıldırım, M. N., Doruk, Ş., Karaman, A. 2019. 3D Yazıcıda Üretilmiş Kavela Bağlantı Elemanının L Tipi Mobilya Köşe Birleştirmelerinde Kullanımı, 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies.

Downloads

Published

2020-06-21

How to Cite

Özgül, H. G., & Tatlı, O. (2020). 3D PRINTER DESIGN, MANUFACTURING AND EFFECT OF INFILL PATTERNS ON MECHANICAL PROPERTlES. ICONTECH INTERNATIONAL JOURNAL, 4(1), 13–24. https://doi.org/10.46291/ICONTECHvol4iss1pp13-24

Issue

Section

Articles